常速度拉伸实验惯性效应的实验研究

本文统计了１５０根Ａ３低碳钢比例拉伸试件的断口位置，并测定了常速度拉伸（４００ｍｍ／ｍｉｎ，０．５ｍｍ／ｍｉｎ）时应变随时间和沿杆长的分布以及应力应变关系；发现７２％试件的断口靠近不动端内。同一时刻在设定速度为４００ｍｍ／ｍｉｎ时杆中最大工程应变差１８％．     

超静定型钢桁架优化设计的面积比法

满应力准则是对超静定型钢桁架进行优化设计的有效方法．但这种方法的主要缺点在于收敛速度很慢甚至不收敛,这给设计工作带来很大的不便．对问题进行了研究,在“型钢压杆稳定设计直接法”的基础上,提出了满应力优化设计的一种新方法——面积比法,有效地提高了设计过程的收敛速度,降低了设计成本,供有关结构设计人员参考．     

不同水介质润滑下GCr15钢的微动磨损特性

采用液压高精度材料试验机考察了平面-球面接触GCr15钢摩擦副在海水、酸性水和洁净水等3种不同水介质润滑下的微动磨损性能．用激光扫描显微镜(LSM)观察了磨痕表面形貌．结果表明：3种水介质对钢-钢摩擦副具有明显的润滑作用，其中酸性水的润滑作用最明显；磨损体积损失同介质的润滑作用和腐蚀作用相关，在洁净水和海水介质润滑下的磨损体积损失较小，在酸性水介质润滑下的磨损体积损失较大；在海水润滑下的GCr15钢磨损表面呈现明显的点蚀特征．     

New exact results for the effective electric, elastic, piezoelectric and other properties of composite ellipsoid assemblages

In this paper we present a unified treatment of composite ellipsoid assemblages in the setting of uncoupled phenomena like conductivity and elasticity and coupled phenomena like thermoelectricity and piezomagnetoelectricity. The building block of this microgeometry is a confocal ellipsoidal particle consisting of a (possibly void) core and a coating. All space is filled up with such units which have different sizes but possess the same aspect ratios. The confocal ellipsoids may have the same orientation in space or may be randomly oriented. The resulting microgeometry simulates two-phase composites in which the reinforcing components are short fibers or elongated particles. Our main interest is in obtaining information of an exact nature on the effective moduli of this microgeometry whose effective tensor symmetry structure depends on the packing mode of the coated ellipsoids. This information will sometimes be complete like the full effective thermoelectric tensor of an assemblage which contains aligned ellipsoids in which the coating is isotropic and the core is arbitrarily anisotropic. In the majority of the cases however the maximum achievable exact information will be only partial and will appear in the form of certain exact relations between the effective moduli of the microgeometry. These exact relations are obtained from exact solutions for the fields in the microstructure for a certain set of loading conditions. In all the considered cases an isotropic coating can be combined with a fully arbitrary core. This covers the most important physical case of anisotropic fibers in an isotropic matrix. Allowing anisotropy in the coating requires the fulfillment of certain constraint conditions between its moduli. Even though in this case the presence of such constraint conditions may render the anisotropic coating material hypothetical, the value of the derived solutions remains since they still provide benchmark comparisons for approximate and numerical treatments. The remarkable feature of the general analysis which covers all treated uncoupled and coupled phenomena is that it is developed solely on the basis of potential solutions of the conduction problem in the same microgeometry.     

预应力钢梁体外索的张力增量分析

将预应力钢梁看作梁与索的组合结构,充分考虑了二者之间的相互作用．利用变分原理推导出在外荷载作用下,体外索张力增量的计算公式,并通过预应力钢梁模型试验对计算结果进行了验证．     

Cr12MoV钢表面磁控溅射Ti/TiN涂层的摩擦磨损性能研究

采用非平衡磁控溅射方法在Cr12MoV钢表面制备了厚度约为3 μm的Ti/TiN涂层,测定了涂层的显微硬度,并通过划痕试验和摩擦磨损试验考察了涂层同基体的结合强度及其摩擦磨损性能.结果表明:Ti/TiN涂层能够显著提高Cr12MoV钢的表面硬度和承载能力;涂层同Cr12MoV钢基体的结合强度较高,划痕临界载荷高于60 N;与此同时,磁控溅射Ti/TiN涂层可以显著改善Cr12MoV钢的耐磨性能.这是由于磁控溅射Ti/TiN涂层硬度高且与Cr12MoV钢基体的结合强度较高所致.     

On numerical solution of dynamic problems in the theory of reinforced shells

Dynamic problems for cylindrical shells reinforced with discrete ribs are examined. A numerical algorithm based on Richardson extrapolation is developed. Specific problems are solved, and the results are analyzed __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 5, pp. 50–56, May 2006.     

波纹钢屋盖结构板件相关屈曲的试验研究与分析

拱型波纹钢屋盖结构的受力机理异常复杂，波纹、加工制作过程中产生的变形和残余应力等初始缺陷在理论分析中很难精确定量描述。论文对波纹钢屋盖结构梯形截面板组进行了轴心和偏心压力作用下稳定承载能力的试验研究，并与理论结果进行了比较分析，试验与理论结果吻合较好。试验结果表明波纹板组具有较高的局部屈曲承载能力，但几乎无屈曲后承栽能力，与平板板组屈曲特性相比有显著差异。     

碳钢表面碳—氮共渗层在高速干摩擦条件下的摩擦学性能研究

对 2 0 # 钢试样进行碳 -氮共渗热处理 ,考察了共渗层在高速干摩擦条件下的摩擦学性能 ,并用扫描电子显微镜和X射线光电子能谱仪对其磨损表面形貌和元素化学状态进行了分析 .结果表明 :随着滑动速度的增加 ,2 0 # 钢表面碳 -氮共渗层的磨损率逐渐降低 ,当滑动速度达到 35m/s左右时 ,磨损率显著增大 .扫描电子显微镜和X射线光电子能谱分析结果表明 ,高速轻载干摩擦条件下 2 0 # 钢表面碳 -氮共渗层的摩擦学性能同磨损表面氧化物的形成和剥落密切相关 ,而磨损率的显著增加是由于磨损表面氧化物类型发生从Fe2 O3 到FeO的转变所致 .